
Reset Chalk Bags
From $24.95
From $24.95
From $92.95
From $92.95
From $109.95
From $109.95
From $79.95
From $89.95
A pioneer among its peers: the first climbing helmet featuring the patented MIPS technology, the Wall Rider MIPS offers maximum safety and protection from impacts caused by tumbling rocks or falls. When the Wall Rider MIPS helmet is subjected to an angled impact, the low friction layer allows the helmet to slide relative to the head. This means that some portion of the rotational forces and energies acting on the head at impact are redirected and absorbed thanks to the large low-friction layer, rather than being transferred to the brain, this reduces the risk of a brain injury. The Wall Rider MIPS combines a cushioning EPP (Expanded Polypropylene) core with a partial hard shell for maximum safety. At just 225 g, this makes the helmet a real lightweight. The Wall Rider feels very comfortable to wear thanks to its ergonomic fit and pleasant cushioning. Safety on the mountain with the Wall Rider MIPS.
MIPS technology – a new level of safety
The first climbing helmet with patented MIPS technology: The Wall Rider MIPS offers maximum safety and reliable protection from rock impact and falls. In the case of a lateral impact, the low-friction MIPS layer allows the helmet to move to displace the pressure exerted on your head. This feature significantly reduces the risk of brain injuries.
A robust yet ultra-light helmet shell
At just 225 grams, the Wall Rider MIPS is a real lightweight. It combines a damping EPP (Expanded Polypropylene) core with a partial hard shell for maximum safety.
An ergonomic fit for greater comfort and safety
If a helmet fits properly, it automatically provides a higher level of safety. The Wall Rider MIPS therefore features an ergonomic fit that adapts perfectly to your head and provides a high level of comfort. This is complemented by comfortable cushioning and large ventilation zones which ensure excellent air circulation and a uniform heat flow.
Overview
Item no. 2030-00250
Weight 225g
Features
Due to the nature of the safety gear we CANNOT accept returns for safety gear and equipment for change of mind or sizing issues.
Safety gear and equipment includes: helmets, slings, carabiners, harnesses, ropes, protection etc.
If there are defects with a purchased item we can accept returns as the products are covered by manufacturers Warranty.
For more information read our returns policy.
Afterpay offers interest-free payment plans for your online purchases. Buy and receive what you want today and pay it off in four equal instalments fornightly.
For full terms and conditions, please visit the Afterpay website
A pioneer among its peers: the first climbing helmet featuring the patented MIPS technology, the Wall Rider MIPS offers maximum safety and protection from impacts caused by tumbling rocks or falls. When the Wall Rider MIPS helmet is subjected to an angled impact, the low friction layer allows the helmet to slide relative to the head. This means that some portion of the rotational forces and energies acting on the head at impact are redirected and absorbed thanks to the large low-friction layer, rather than being transferred to the brain, this reduces the risk of a brain injury. The Wall Rider MIPS combines a cushioning EPP (Expanded Polypropylene) core with a partial hard shell for maximum safety. At just 225 g, this makes the helmet a real lightweight. The Wall Rider feels very comfortable to wear thanks to its ergonomic fit and pleasant cushioning. Safety on the mountain with the Wall Rider MIPS.
MIPS technology – a new level of safety
The first climbing helmet with patented MIPS technology: The Wall Rider MIPS offers maximum safety and reliable protection from rock impact and falls. In the case of a lateral impact, the low-friction MIPS layer allows the helmet to move to displace the pressure exerted on your head. This feature significantly reduces the risk of brain injuries.
A robust yet ultra-light helmet shell
At just 225 grams, the Wall Rider MIPS is a real lightweight. It combines a damping EPP (Expanded Polypropylene) core with a partial hard shell for maximum safety.
An ergonomic fit for greater comfort and safety
If a helmet fits properly, it automatically provides a higher level of safety. The Wall Rider MIPS therefore features an ergonomic fit that adapts perfectly to your head and provides a high level of comfort. This is complemented by comfortable cushioning and large ventilation zones which ensure excellent air circulation and a uniform heat flow.
Overview
Item no. 2030-00250
Weight 225g
Features
Size 1 | 52 - 57cm |
Size 2 | 56 - 61cm |
SKU | MM-203000251 |
Weight | 225g |
Certification | EN 12492 standard |
Model # | 2030-00250 |
From $204.95
From $199.95
$46.30
From $179.95
From $179.95
From $94.95
From $114.95
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Climbing Anchors’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Climbing Anchors’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is . Our ABN is 14 604 546 590. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
Climbing Anchors is the sole owner of the information collected on this site. We will not sell, share or rent this information to others in ways different from what is disclosed in this statement.
If you choose to register an account with this website you are required to give your contact information (such as name and email address). This information is used to contact the user about the services on our site for which they have expressed interest.
We request information from the user on our order form. Here a user must provide contact information (like name and shipping address) and method of payment. This information is used for billing purposes and to fill the customer's orders. If we have trouble processing an order, this contact information is used to get in touch with the user. For your security, Climbing Anchors does not retain credit card information after completion of your order.
We may use an outside freight company to ship orders, and a credit card processing company to bill users for goods and services. These companies do not retain, share, store or use personally identifiable information for any secondary purposes.
This website takes every precaution to protect our users' information. When users submit sensitive information via the website, your information is protected both online and offline.
If you have any questions about the security at our website, you can send an email to sales@climbinganchors.com.
If a user's personally identifiable information changes (such as your post code), or if a user no longer desires our service, we will endeavour to provide a way to correct, update or remove that user's personal data provided to us. This can usually be done at the member account page or by emailing our Customer Support.